Forum > Gauntlets

Klynns' Eternal Armory DW gaunts

(1/3) > >>

Klynn Targh:
Eternal armory sent me some great gaunts in the mail.

nice and cleaned up, they only came with a minimum of flash.  Super sturdy and though they are basic, they have a great base for modding!  A do-it-yourselfers dream!  Thanks Eternal Armory!

tk3181:
I look forward to watching your build!  :D

Klynn Targh:
lots of work put in

Drilled holes for access with my dremel.  the rear portion was cut open so i could put a data panel with some alpha-numeric keys into it with a backing piece of plastic provided by EA with the kit.

These are the greeblies i'll be using.  the short stocky pieces are going to be placed in the rear holes where the power feed cables will go.  the longer chrome pieces are going to be the dart barrels protruding from the front of one of my left gaunt.

this is the tubing I'll be using for power feeds.

Klynn Targh:
well hey, jmp on that horse and ride it!

Greeblies and dart shooters installed.  For anyone curious as to my components, the dart throwers are BNC compression connectors from the electrical section in Lowes, the tube connections are flare nuts found in the plumbing section of Lowes.  Happy hunting my fellow mercs!

Viradechtis:
I'm actually very curious about the brand and color purple you used! Thats exactly the color I need but every paint i've found hasn't dried the way i've imagined.

Navigation

[0] Message Index

[#] Next page