Forum > Gauntlets
Ordeyn's Scratch Build Gaunts (Pic Heavy)
Ordeyn:
I'm doing some scratch build gaunts from PVC and what other scraps I have around. I made some custom templates with the help of Arizona Iced Tea cans.
Only the one is cut out so far. I'm going to glue the pieces on.
QUESTION: I've got some JB Stick Weld on hand, but will that be strong enough to hold the pieces on? I will be putting the gaunts on by sliding my hand in.
Mandalore the Uniter:
Those look nice, and being PVC makes them damn near unbreakable. :P
ConDar Ward:
Looking good Ordeyn ..... 8)
Any Big plans for your kit ? :rolleyes: ;D
Byrek Avery:
Gnarly looking :D
Morut Naast:
Like the look you have going here. Looking forward to seeing what you do with these.
The JB weld would probably hold pretty well, but I would recommend you go get you some PVC glue. That will pretty much never fail if applied right. If you can find it, get Christy's Red Hot ($5-ish), then you wont need a primer to make it work. I have made an effort to break those bonds and ususally I end up breaking the PVC before the weld fails.
Navigation
[0] Message Index
[#] Next page
Go to full version