Eva - Vera's Little Sister Now a WIP ;D Restarting on Page 2

[Niabi]

Arise from the ashes thread

well im starting this Scratch build im changing the original concept a little bit but im just going to roll with it and see where it end up.
Im hopeing that this will become Vera's Little Sister   

any hoo 1st pic


Vera's little sister by Niabi Vok'Chi, on Flickr

more to come

[Kardos Shantiel]

There better be more to come.. LOL! Great start!

[Niabi]

Update time

been working hard today cutting, glueing, and sanding. (several hours of sanding with the old dremal)

4 cut outs ready for glueing

Vera's Little Sister by Niabi Vok'Chi, on Flickr

didn't take any more pics until just now (too much dust for camera)  so here where i am now

Vera's Little Sister by Niabi Vok'Chi, on Flickr

Vera's Little Sister by Niabi Vok'Chi, on Flickr

Vera's Little Sister by Niabi Vok'Chi, on Flickr

Vera's Little Sister by Niabi Vok'Chi, on Flickr

Vera's Little Sister by Niabi Vok'Chi, on Flickr

Next up is some more sanding (by hand this time) to clean up the sanding areas a bit.

The squire hole in the front grip is going to be a housing for some sensors n stuff

the eagle eyed among you will  notice that i have had a change in material to MDF.
 

[MMWA]

mdf is so much fun to work with!

[Kel T Skirata]

Nice work so far ner'vod 

[Niabi]

Nice work so far ner'vod 

Thanks Kel

mdf is so much fun to work with!

LOL yer. i was coved in an Inch of dust when i finished sanding.

Small update (wit bad camera phone pic lol)  bit more sanding and Bondo applied
here is a pic so you can get an idear of how this is going to be.

Vera's little sister by Niabi Vok'Chi, on Flickr

[Antares Typhus]

Good to see you making progress on this!

*now mail me vera >:d)

[Adan Ordo]

Looks promising

[Ordo Dar"veyn]

Im really liking the way this build is going vod. I don't see too many scratchbuilt weapons around here, so something new is always enjoyed. Looks like you're off to an awesome start, can't wait to see more progress!

[Niabi]

NECRO 

Due to a certain Mando's Awesome Verp build i have been inspired to finish VLS (Vera's Little Sister)

Now iv been thinking about this and im going to take this is a slightly different direction now. Well by slightly i mean completely 

The MDF VLS was SOOOOOOOOOOOOOOOOOOOOOOO heavy (part of the resign i stopped) and she was not looking very much like Vera. So im scraping the scratch build and going back to my roots

Im going shopping this weekend to hunt down a Cheep nerf longstrike. once i have the piece of osik that is a nerf i shall start the chopping to make a Proper VLS who will look like Vera but more compact like a P90 / the Dass Jennir weapon. 

[Kel T Skirata]

looking forward to seeing it bruv, Vera is one of my faves 

[Zolar Kresh]

Details this time.... many many details... so I can totally steal your idea and make one for myself.

Looking forward to this necro-build

[ConDar Ward]

I can't wait to See her .... 

[Niabi]

Details this time.... many many details...

your wish is my Command

And so it begins:

Picked up a new Longstrike


DSCN0486 by Niabi Vok'Chi, on Flickr

Unboxing :


DSCN0487 by Niabi Vok'Chi, on Flickr

the bits i will use


DSCN0488 by Niabi Vok'Chi, on Flickr

Oh No is see something:


DSCN0490 by Niabi Vok'Chi, on Flickr

Im not allowed to modify it 


DSCN0489 by Niabi Vok'Chi, on Flickr

Striping out the Innards as you dont need this lot + they make good greebs


DSCN0491 by Niabi Vok'Chi, on Flickr

I swear they are making these harder to take apart as this one was glued a lot more than the last one


DSCN0492 by Niabi Vok'Chi, on Flickr

You will now have a box of bits Dont loses these:


DSCN0493 by Niabi Vok'Chi, on Flickr

I used the Vera Cut guide as a start :


cut guide by Niabi Vok'Chi, on Flickr

then i started to play putting the bits in there new place:


DSCN0494 by Niabi Vok'Chi, on Flickr

Think this is the basic lay out :


DSCN0495 by Niabi Vok'Chi, on Flickr

Im going to put a bit on the foregrip using the bits i have left over from chopping it up but im still working on it

More to come

[Kel T Skirata]

Had to laugh at the " Do not modify "  Yes he will ! He's done it before and will do it again, get it up ye Nerf